Painting a Concrete Floor

Ok, the floor in the music room is painted and I've been slowly chipping away at the final touches to call this room done, but in the meantime, it's habitable! Hooray!!

So about those floors.....here they are.

Well, the paint was still wet in this picture....it's not shiny at all now that it's dry!

So I already went over the crazy/scary part of painting concrete floors. The rest was easy (excepting maybe waiting 5 days to put anything on said floors while the paint cured).

The first thing I did was use a bonding primer so that the paint would really stick to the concrete. That had to dry for at least 24 hours before the first coat of paint went on. Here's a mid coat picture...

I used Behr's porch and floor paint for this because it was what they recommended at Home Depot. It's really thick and sludgy! And with the color I chose, it looked like (and was about the consistency of) chocolate cake batter coming out of the paint can.

I actually did two coats, because just one left a few spots that weren't completely covered, but since the second coat was so much thinner than the first, I got away with only using one gallon of paint.

Ready for the before and after? Here's the garage as it was when we moved in....

...and here it is (even with a little bit of furniture!)

While things look pretty decent in this pic (which I hurriedly took with my iphone, so it's not the greatest), there's still quite a bit to be done in here. I've still got to bring in a desk, more chairs, make another set of curtains (there's a window on the far wall), finishing touches on the paint....in short, I've still got plenty of work to do!

This is Your Brain on Drugs....

....and this is my floor on acid!

I feel like a little back story might be in order.

So I mentioned here and here that we were planning on (and in the midst of) converting our garage into liveable space that could be used as my music room. Well it's ALMOST done! You can see above that the walls have been painted (though there is some touch up work to do since the baseboards have been installed), the door installed, and baseboard added. What you can't see is the HVAC vent that has been added, the painted ceilings, the closet, and added electrical outlets.

Rather than adding the expense of putting flooring over the concrete, I decided to just paint the floor. At the beginning of this project, this looked like a no brainer. You just roll out the paint on the floor like you do on the walls right?

WRONG.

When I went to actually buy the floor paint, I was informed that because most garage floors are sealed (it's what keeps every drip and drop that comes out of our cars from leaving big ugly stains), I would have to etch the concrete in order to open the pores and get the paint to stick.

So how does one etch a concrete floor? With muriatic acid. Yes, I said acid.

The nice man at Home Depot was nice enough to walk me through the process, but when it came time to actually do this, I have to admit I was pretty intimidated. Acid eats through clothing, skin. It is harmful if inhaled....and besides the possibility of bodily harm, what if it got on something it shouldn't? And muriatic acid (which I have since been informed is a variety of sulphuric acid) is the sizzle and pop kind.

So the process goes like this:

1. Don long sleeves, long pants, shoes you don't care about, and rubber gloves. 
2. Open all the windows and doors so you have good ventilation. 
3. In a watering can, you combine 3 parts water to 1 part acid. I recommend doing this outside so the fumes aren't in your house.
4. This solution gets sprinkled on a section of the concrete (whilst being very careful not to get any of it on your clothes, shoes, skin, etc. Safety first). It will sizzle like an egg in a hot frying pan. It's scary. Just keep going.
5. Push the acid solution around with a broom to make sure you get full coverage.
6. Wait a few minutes.
7. With a mop and a bucket full of plain water, mop up the acid. You will get all kinds of nastiness off your floor that you never knew was there. I had to change the water frequently.
8. Repeat (still working in sections) until you have etched the entire floor.
9. Once the floor is dry, mop with plain water again.

All total (not including drying time), this took me about two hours for a room the size of a one car garage. I barely finished the acid part in time to get ready for school, and did the final mopping when I got home. I still have to prime the floor and then paint it. I'll keep you posted!

Has anyone else ever etched concrete? Was it as scary for you as it was for me?

A Blank Slate

If you were starting with a completely blank slate of a room, what would you do with it?

This is what I am trying to figure out right now. We are in the process of converting our garage to living space and the finished room will be my music room/office. It has to serve as an office space, but also as a teaching space, a rehearsal space, a practice space, a generally creative space, a study space and as a space to house guests when we have more than will fit into our guest room.

Since it is such a large space, I have no doubt that it can serve all these purposes, and from a practical standpoint, I know what needs to go into the room:

• Desk
• At least four armless chairs (not slipper chairs....more like dining or side chairs)
• A sleeper sofa
• A large bookshelf
• Some sort of printer stand (this may be the previously mentioned bookshelf)
• My cello stand, keyboard (hopefully a real piano eventually), and other instruments

However, from a decorating standpoint,  I'm kind of stuck. And I'm not just stuck on curtains or a desk....I don't even know what color I want to paint the walls! or the floor! I've contemplated several colors: mint green, peach, pale pink, white.....I just can't seem to decide....or find the shade that I really want.

Boo hoo....waaaahhh!!!

So who has a favorite paint color?? And, to repeat my earlier question, if you had a blank slate of a room, what would you do with it?